Solar Panels and Chargers


Sunlinq E-sun portable folding solar charger

A stylish charger that´s small enough to slip in a cargo trouser pocket or glove compartment, but opens up into a powerful portable solar panel with near universal connectivity. Suitable for charging handheld devices and rechargeable batteries, small 12V accessories, and 12V vehicle batteries. Ideal for expeditions, gap year travel, outdoor photographers and emergency kits.  Availble in 3 different power sizes.



  • Uses Global Solar´s revolutionary PowerFLEX™ technology, with CIGS solar cells

  • Durable and weatherproof, yet lightweight.

  • Retail packaged, with full instructions included.

  • Complete with cable set for full connectivity.

  • Works well even under poor light conditions.

  • Can be mounted to curved surfaces; built-in grommets.

  • Built-in discharge protection.

  • Voltage limited at 15.6 to help protect your appliances; max operating current 800mA.

  • Closed dimensions: 130 x 230 x 13 mm, open dimensions: 750 x 406 x 0.8 mm.

  • Not designed for permanent outdoor use.

  • 1 year warranty.

  • Team with Power Pack for even more versatility


Product Codes


06003GS01  6.5 W 


06003GS02  12 W  


06003GS11  25 W

£99.99
(+ postage: £0)
Quantity: Options:
Global Solar folding panel with cables
Global Solar´s P3 range of rugged military-style folding panels are small enough to fit in a rucksack, but open up into a powerful portable solar panel for 12V battery charging.. Incorporating solid state, thin-film, PowerFLEX™ solar technology, the P3 provides an excellent choice for situations that require lightweight, durable, silent power. Re-charge batteries, power communication equipment and mobile electronics, plus reduce the battery logistic challenge with the P3. It provides silent energy independence to the user. With no glass to break and easy connectivity these lightweight panels are ideal for expeditions and disaster relief.


  • Uses Global Solar´s revolutionary PowerFLEX™ technology, with CIGS solar cells.

  • Complete with cable set for full connectivity.

  • Works well even under poor light conditions.

  • Can be mounted to curved surfaces; built-in grommets.

  • Built-in discharge protection.

  • Please note, although nominally 12V, these products have an open circuit voltage of up to 30V.

  • The 48W P3 is available for 24V charging as well as 12V.

  • Charge controller required for standard 12V battery charging — see our P3 controller for plug-and-play connectivity.

  • 1 year warranty.


Product codes

06003GS03  15W 


06003GS04  30W 


06003GS05  48W  


06003GS13  48W  24V 


06003GS06  55W    


£330
(+ postage: £0)
Quantity: Options:
P3 folding panel controller

12V, 7A controller for use with P3 folding solar panels up to 55W.


LED indicators show charging or full.


9.21 x 6.35 x 2.54cm

£40
(+ postage: £3)
Quantity:
Powerfilm Rollable Solar Panels
Durable, ultra-rollable and paper-thin, these amazing marine-grade Powerfilm panels can be fully rolled up. Perfect for applications where extreme flexibility is important, or where a very thin profile is needed. Powerfilm panels can be walked on and are suitable for adhering to a firm surface using a PVA glue.

  • Integrated with a fabric backing for enhanced product functionality these panels perform well in diverse environments, including hot sun.

  • Cadmium Free.

  • Panels comes in a storage tube with a 15ft long 12V battery connector.

  • Blocking diodes fitted. Powerfilm solar panels are monolithically integrated which eliminates the need for damage-prone manual connections of individual solar cells.

  • 5 year output warranty.

Product Codes


06003IT01  5W  


06003IT02  10W  


06003IT03  20W

£100
(+ postage: £0)
Quantity: Options:
Powerfilm cable set
Powerfilm cables for 12V systems. Compatible with ITF Powerfilm modules.


Set comprises 12V plug, 12V socket, and approx 3m extension cable.




Product code: 08001IT00
£25
(+ postage: £3)
Quantity:
Mini module with stand and screw terminals
Mini module with stand and screw terminals 2.5V 0.5W




Product code: 06004IP01 
£30
(+ postage: £3)
Quantity:
Mini module folding with pin connectors 2V 0.7W

Mini module folding with pin connectors 2V 0.7W  



Product code: 06004IP02
£30
(+ postage: £3)
Quantity:
Mini module with round pin plug 4.5V or 9V 1.4W

Mini module with round pin plug 4.5V or 9V 1.4W  





Product code: 06004IP03
£45
(+ postage: £3)
Quantity:
Mini module 0.5A/1.5V

Mini module 0.5A/1.5V  





Product code: 06004IP04
£20
(+ postage: £3)
Quantity:
Mini module 0.4A/0.5V

Mini module 0.4A/0.5V  






Product code: 06004IP05
£6
(+ postage: £3)
Quantity:
Mini module 0.75A/0.5V

06004IP06  Mini module 0.75A/0.5V   £12.00





Product code: 06004IP06
£12
(+ postage: £3)
Quantity:
Mini module 1.5A/0.5V Polycell

Mini module 1.5A/0.5V Polycell 





Product code: 06004IP07 
£23
(+ postage: £3)
Quantity:
Mini module 0.3A/0.5V Polycell

Mini module 0.3A/0.5V Polycell





Product code: 06004IP08 
£30
(+ postage: £3)
Quantity:
Mini module 0.5A/1.0V

Mini module 0.5A/1.0V 





Product code: 06004IP09 
£17
(+ postage: £3)
Quantity:
2W Sunsei SE-135 solar trickle charger
The Sunsei 135 is a 2W solar powered car battery maintainer that will trickle charge a 12V battery. Ideal for cars, small boats, tractors and other vehicles. Please note, as with all solar vehicle chargers, to charge via the cigarette lighter socket, the socket must be live when the ignition is switched of. If this is not the case you can still use the charger by connecting directly to the battery with the crocodile clips provided.

  • Never overcharges.

  • Connects in seconds via the cigarette lighter socket or crocodile clips.

  • Verify sunlight exposure by the push of a button.

  • Easily mounted on the inside of a car window using suction cups.

  • Requires simple addition of silicon sealant for long-term outdoor use.

  • Built-in discharge protection.

  • Comes with 4ft cigarette lighter adaptor cable, 10ft battery clamp cable and 4 suction cups.

  • Rated at 2W (135mAmps@15V).

  • Measures 394x127x20mm; weighs 41g.

  • 10 year warranty on panel output; 2 year materials warranty.


Product code: 06002IC03 
£24.99
(+ postage: £3)
Quantity:
6W Sunsei SE-400 solar charger
Larger vehicles such as pick-ups, vans, RV´s, or small boats have larger batteries and larger battery drains simply because they have more electronics. The Sunsei 400 solar battery charger slowly charges larger 12V deep-cycle batteries, helping to protect them during storage periods.
Helps maintain 12V batteries and reduce battery loss caused by key off electronic drains and natural voltage losses.

  • Weatherproof and designed for outdoor use.

  • Amorphous silicon panel works well under overcast conditions.

  • Verify sunlight exposure at the push of a button.

  • ABS plastic frame won´t scratch delicate surfaces.

  • Built-in discharge protection – won´t discharge your battery in darkness or on dull days.

  • Comes with battery clamps and ring connectors, extension cable (10ft), 12V plug and socket cables and mounting screws.

  • Maximum power 6Wp.

  • Nominal current: 400mA @ 15V in full sun Suitable for all 12V batteries.

  • Suitable for all 12V batteries.

  • Dimensions: 375 x 360 x 26 mm, 1.5kg.

  • 10 year warranty on panel output; 2 year materials warranty.

  • Ball and socket type mount available.



Product code: 06002IC01 
£69.99
(+ postage: £3)
Quantity:
18W Sunsei SE-1200 solar charger
ICP´s amorphous silicon Sunsei panels perform well under low light conditions, providing solid battery charging power for a variety of small 12 Volt applications, or for trickle charging larger batteries. These panels are very simple to install and come with mounting screws and battery clamps. ABS plastic frame won´t scratch your roof. Push-button indicator lets you know your panel is charging. These panels used to be known under the Battery Saver brand.

  • Ideal starter panels for those making their first foray into solar power.

  • Installs in seconds/maintenance free.

  • Weatherproof/rust/shock/UV-resistant frame with mounting screws included.

  • Works even under low light conditions.

  • Typical uses: cottages, trailers, boats, mobile homes, etc.

  • Cabling includes 10 ft extension cable, panel-to-panel jumper cable, 12V cigarette lighter socket and 12V cigarette lighter plug.

  • Built-in discharge protection (blocking diodes).

  • Includes both crocodile clips and ring terminals to connect to battery.

  • 10 year warranty on panel output; 2 year materials warranty.



Product code: 06002IC02 
£129.99
(+ postage: £3)
Quantity:
18W Sunsei solar complete kit
ICP´s amorphous silicon Sunsei panels perform well under low light conditions, providing solid battery charging power for a variety of small 12 Volt applications, or for trickle charging large batteries. These all-inclusive kits are very simple to install and come with mounting screws and a range of 12V cables; 18W kits include a charge regulator. These panels used to be known under the Battery Saver brand.



  • 18W kits include Sunsei 10A charge controller with screw terminals for simple installation.

  • ABS plastic frame with integrated mounting feet won´t scratch your roof; mounting screws included.

  • Frame is weatherproof/rust/shock/UV-resistant.

  • Push-button indicator lets you know your panel is charging.

  • Ideal starter kits for those making their first foray into solar power.

  • Works even under low light conditions.

  • Typical uses are cottages, trailers, boats, mobile homes, etc.

  • Cabling includes 10 ft extension cable, panel-to-panel jumper cable, 12V cigarette lighter socket and 12V cigarette lighter plug.

  • Built-in discharge protection (blocking diodes).

  • Includes both crocodile clips and ring terminals to connect to battery. 

  • SolarGrip mount available for SE-400.

  • 5 year output warranty.



Product code: 05002IC01
£154.99
(+ postage: £7.50)
Quantity:
Yingli's polycrystalline solar panels offer superb value for money. These 12V panels are suitable for a range of professional and DIY applications.
Heavy duty anodised aluminium frame provides high wind resistance and convenient mounting access.
Cells are laminated between high transmissivity, low iron, 3mm tempered glass and a sheet of TPT material and finally two sheets of EVA to prevent moisture entering the module.
Installation holes for standard bracket systems are located on the frame.
Bypass diodes on panels 30W and above to improve shadow tolerance.
Waterproof versatile junction box provides flexibility of connections.
Modules are manufactured in accordance with IEC 61215.
25 years limited output guarantee.
Require blocking diodes if not used with a regulator.


Product codes:



06001JP01 5W 12v    £50.00


06001JP02 20W 12v   £150.00


06001JP03 30W 12v   £200.00


06001JP04 40W 12v   £260.00


06001JP05 60W 12v   £385.00


06001JP06 80W 12v   £465.00



 06001JP06 
£50
(+ postage: £7.50)
Quantity: Options:
Sunsport 6 Controller
Automatic nighttime shutdown with an intelligent design means that in the dark the Sunsport 6 uses absolutely zero power. Ideal for PV systems where efficiency is important. Boaters can leave it connected all winter without draining the batteries. Other controllers, which have a standby current draw, will drain the battery over the winter if they receive little or no solar input.




  • Stylish design with many features.

  • Save up to 10% of the power from a 5 Watt module.

  • Protection (PV & Battery), against short-circuit & reverse polarity, overload, over temperature & battery removal

  • Can charge a completely discharged battery

  • Regulation method: Low frequency On-Off series; Typical set points: Off: 14.1 Volts On: 13.3 Volts

  • Extreme design –40° to +70°C

  • Series design (not shunt)

  • Reliable - 100% solid state

  • No radio interference

  • LED indicates charging

  • Wall mountable; stainless steel mounting screws provided

  • Solid aluminium case, completely sealed in epoxy potting

  • Dimensions: 6.4 x 9.6 x 1.8 cm; 210g

  • Battery consumption zero, 0.0 mA

  • Typical solar consumption 8 mA daylight only, 3 mA without LED

  • 5 year warranty



For bulk orders we can customise voltage set-points, LED, and wire lead lengths .




Product code: 07001EE06 

£55
(+ postage: £3)
Quantity:
Sunsport 10 Controller
Automatic nighttime shutdown with an intelligent design means that in the dark the Sunsport 10 uses absolutely zero power. Ideal for PV systems where efficiency is important. Boaters can leave it connected all winter without draining the batteries. Other controllers, which have a standby current draw, will drain the battery over the winter if they receive little or no solar input.




  • Many innovations in a sleek new design.

  • Save up to 10% of the power from a 5 Watt module.

  • Protection (PV & Battery), against short-circuit & reverse polarity, overload, over temperature & battery removal

  • Can charge a completely discharged battery

  • Regulation method: Low frequency On-Off series type (5% voltage drop) Typical set points: Off: 14.1 Volts On: 13.3 Volts (other set points available)

  • Extreme design –40° to +70°C

  • Series design (not shunt)

  • Reliable - 100% solid state

  • No radio interference

  • Three LED status lights show solar on, battery charging, and battery full

  • Wall mountable; stainless steel mounting screws provided

  • Solid aluminium case, completely sealed in epoxy potting

  • Dimensions: 9 x 14 x 4 cm; 500g

  • Battery consumption zero, 0.0 mA

  • Typical solar consumption 8mA daylight only, 3 mA without LED

  • 5 year warranty



For bulk orders we can customise voltage set-points, LED, and wire lead lengths.




Product code: 07001EE03
£95
(+ postage: £3)
Quantity:
Sunsport 10 Controller Dual Battery
Marine option specifically designed for boats charges two isolated batteries from one panel. Completely sealed for protection from the harsh salt water environment.
Automatic nighttime shutdown with an intelligent design means that in the dark the Sunsport 10M uses absolutely zero power. Ideal for PV systems where efficiency is important. Boaters can leave it connected all winter without draining the batteries. Other controllers, which have a standby current draw, will drain the battery over the winter if they receive little or no solar input.




  • Many innovations in a sleek new design.

  • Save up to 10% of the power from a 5 Watt module.

  • Protection (PV & Battery), against short-circuit & reverse polarity, overload, over temperature & battery removal

  • Can charge a completely discharged battery

  • Regulation method: Low frequency On-Off series type (5% voltage drop)

  • Typical set points: Off: 14.1 Volts On: 13.3 Volts (other set points available)

  • Extreme design –40° to +70°C

  • Series design (not shunt)

  • Reliable - 100% solid state

  • No radio interference

  • Three LED status lights show solar on, battery charging, and battery full

  • Wall mountable; stainless steel mounting screws provided

  • Solid aluminium case, completely sealed in epoxy potting

  • Dimensions: 9 x 14 x 4 cm; 500g

  • Battery consumption zero, 0.0 mA

  • Typical solar consumption 8mA daylight only, 3 mA without LED

  • 5 year warranty



For bulk orders we can customise voltage set-points, LED, and wire lead lengths.


Product code: 07001EE05 


£110
(+ postage: £3)
Quantity:
Sunsei 10A controller (CC10000)
Highly reliable 12V, 10A charge controller, part of the Sunsei range. It will efficiently charge your batteries and provide years of protection from overcharging, prolonging your battery life and reducing maintenance requirements.




  • Simple, rugged electronics – a low component count and 100% solid state control functions make this a highly reliable controller.

  • Features two stage charging – boost and float charge using pulse width modulation (PWM)

  • Status LED indicates battery charging

  • Reverse leakage protection prevents power loss at night

  • Terminal Block – For sound and easy wire connections

  • 57x70x28mm, 0.12kg.


Product code: 07001IC01 

£30
(+ postage: £3)
Quantity:
Sunsei 25A controller (CC25000)
Highly reliable 12/24V, 25A charge controller, part of the Sunsei range. It will efficiently charge your batteries and provide years of protection from overcharging, prolonging your battery life and reducing maintenance requirements.




  • Suitable for 12V and 24V systems; automatic voltage detection

  • adjusts battery voltage limits with temperature

  • built-in battery voltage and charge function indicator by LED display

  • Simple, rugged electronics – a low component count and 100% solid state control functions make this a highly reliable controller.

  • Features two stage charging – boost and float charge using pulse width modulation (PWM)

  • Status LED indicates battery charging

  • Reverse leakage protection prevents power loss at night

  • Terminal Block – For sound and easy wire connections

  • 57x70x28mm, 0.12kg.


Product code: 07001IC02

£80
(+ postage: £3)
Quantity:
ASC 20W controller
Uses less than1/10th the power of the industry average. The zero battery consumption at night saves lots of power, especially in systems that get covered in snow or need to last through prolonged overcast conditions. Almost all other charge regulators have a standby current draw that will drain the battery during poor light conditions.




  • Perfect for telecommunications, solar powered parking meters and other small PV systems up to 20W.

  • Save up to 10% of the power from a 5 Watt module.

  • Protection (PV & Battery), against short-circuit & reverse polarity, overload, over temperature & battery removal

  • Can charge a completely discharged battery

  • Extreme design –40° to +70°C

  • Series design (not shunt)

  • Reliable - 100% solid state

  • No radio interference

  • LED indicates charging

  • Wall mountable ABS plastic case

  • Fully encapsulated in epoxy potting

  • Dimensions: 3.8 x 7.0 x 3.1 cm; 34g

  • Battery consumption zero, 0.0 mA

  • Typical solar consumption 5 mA daylight only, 1 mA without LED

  • 5 year warranty


Ultra low consumption version (1mA during daylight only) with no LED option available.



For bulk orders we can customise voltage set-points and wire lead lengths.




Product code:

07001EE04 
07001EE01  (No LED)  
£45
(+ postage: £3)
Quantity: Options:
P3 folding panel controller

12V, 7A controller for use with P3 folding solar panels up to 55W.


LED indicators show charging or full. 9.21 x 6.35 x 2.54cm




Product code: 07001GS01

£40
(+ postage: £3)
Quantity:
PowerBank Universal Li-ion battery
A lightweight Li-ion battery capable of charging a huge range of small electronics (less than 3.5W) with a variety of voltages. The size of a packet of cigarettes, the PowerBank can recharge many popular mobile phones, PalmOne Tungsten and Zire series handhelds, HP iPAQ PDA's, Asus MyPal series, Toshiba e800, Mio 168 Pocket PC Phones, imate Pocket PC Phones, and a range of Digital cameras, MP3 players and other mobile audio devices. Combines well with the Sunlinq range of portable solar chargers.




  • High capacity, durable and light weight.

  • Typically will not work with products rated higher than 3.5W (smart phones, PDAs, hand-held computers)

  • Includes 6 digital camera connectors, 5 mobile phone connectors

  • Battery capacity: 2600mAh @ 3.6V

  • Powerbank output voltages adjustable to: DC 5.2V, 6.2V, 7.2V

  • Max output current: 1800mA

  • PowerBank nominal input range: 4.8-5.2V, 400-600mA

  • Adaptor output current: 15-700mA

  • Powerbank dimensions: 102 x 64 x 26 mm

  • Weight: 167g

  • At present we can only supply a US style mains charger

  • 1 year warranty



Product code: 08002GS01
£55
(+ postage: £3)
Quantity:
XPower Powerpack 300
The XPower Powerpack 300 by Xantrex provides up to 300 watts of silent household (AC) and DC power anytime, anywhere. A convenient source of power for year-round use – power camcorders, video games, stereos, computers, laptops and small power tools. Also ideal for expeditions, emergency situations and jump-starting a vehicle.



  • Built-in 300W inverter with sealed, non-spillable 20Ah AGM battery

  • 3-pin, 230V mains type plug to power many household appliances

  • AC output power: 250W continuous, 300W for 5 mins

  • Cold cranking amps: 200A

  • Smart circuitry protects against reverse polarity jump-start connections

  • Built-in fluorescent lights for emergency illumination

  • AC and DC charger cables allow recharging from mains, vehicle or solar panel (up to 30W)

  • Recharges from a running vehicle battery is as little as 2.5 hours; takes up to 40 hours to recharge from mains.

  • Recharges from a 30W solar panel in 6 hours of sunlight.

  • Battery level meter easily monitors the status of the Powerpack battery.

  • AC charger offers battery overcharge protection

  • Audible alarm signals when the unit begins to overheat and in times of under voltage

  • Electrical current overload and overheating protection ensure a longer Powerpack life.

  • Includes jumper cables, AC charger, DC charging cable and accessory bag.

  • Dimensions: 300 x 130 x 318 mm, 8.2kg

  • 2-year warranty


Product code: 08002XA01



£100
(+ postage: £7.50)
Quantity:
Solar Grip mounting system for Sunsei SE-400

The Solar Grip is a versatile mounting system that permits a quick temporary or permanent install of the Sunsei SE-400 without the need for any hand tools.


  • Comes with a table mount and a rail mounting system.

  • No need to drill your deck or roof

  • Fully adjustable ball and socket joint rotates 360°

  • Correct installation can increase power generation of the panel by up to 35%.

  • Ideal for boats, motorhomes and caravans.


Product code: 08003IC01
£39.99
(+ postage: £3)
Quantity:
Make payments with PayPal - it's fast, free and secure!